Consequences of improper operation of constant temperature and humidity tester (below)

8. When the low temperature operation is completed, be sure to set the temperature condition at 60 ℃ and perform the drying process for about half an hour before opening the door to avoid affecting the measurement time of the next operating conditions or the evaporator freezing phenomenon or damage to the test object. (If there is no actual drying treatment at 60 ℃, the machine will malfunction. Although it is a human error during the warranty period, our company will not provide free service).
9. During the operation of the constant temperature and humidity tester, unless absolutely necessary, please do not open the door, otherwise it may cause the following adverse consequences:
High temperature and humidity rushed out of the box ……… very dangerous!
The inside of the door is still hot ... causing injury!
10. High-temperature air may trigger a fire alarm and cause malfunctions!
11. Door opening method: When opening the door, the operator must move backward along the door opening direction to prevent a large amount of hot air from flowing out and injuring people.
12. Please note that the constant temperature and humidity tester must be grounded safely and securely to avoid electrostatic induction!
13. Circuit short-circuiter, temperature over-temperature protector, provide the safety protection of the test product of this machine and the operator, so please check it regularly.
14. The correct device wet ball test cloth, square energy to take the correct relative humidity.
15. During operation, please do not check with your hands to avoid danger of electric shock or injury to the fan, so please stop the operation first, turn off the power and then repair.

16. Full-time personnel of the non-constant temperature and humidity tester are not allowed to carry out maintenance and inspection on the machine. During maintenance and inspection, the full-time personnel shall carry out the supervision and guardians shall supervise to prevent uninformed persons from energizing and closing, which may cause electric shock.

The fully Automatic Strapping Machine KZV1220 is specially used to strap the pallets. The strap head is the model VK10K120-16 made by TITAN. The PLC is SMART S7-200 from SIEMENS, which ensure the advanced property and reliable operation. This machine is used with the pallet wrapping and conveying line automatically in no need of manual operation.This machine is mainly equipped by Frame, strapping head, belt feeding unit, belt ring plate  unit and control platform. Fully automatic with tape of PP/ PET. Height sensor control to strap pallets with different size. Movable tape rail ensure the straight strapping.Pressure unite ensure the strapping quality at two or four sides.Dynamical tape panel pick back the additional tape.Strong and easy maintenance, high stability, beautiful welding surface

Vertical Strapping Machine

Vertical Strapping Machine,Carton Box Strapping Machine,Vertical Carton Strapping Machine,Vertical Hand Strapping Machine

Shandong Sinolion Machinery Corp. Ltd , https://www.packingline.nl

Posted on