How to choose a shower room
Look at the glass
1 See if the glass is transparent, with or without defects such as noise and bubbles.
Analysis: Imperfections in glass materials or defects in the process can cause defects such as noise and bubbles in the glass, which will reduce the hardness and strength of the glass.
2 See if the 3c mark is certified on the original glass.
Analysis: 3c certification is the abbreviation of China's compulsory product certification, shower room products without this logo can not be sold.
3 look at the complete tempered glass fragment model
Analysis: According to the national standard, the safety fragmentation per 50*50mm tempered glass area should reach 40 or more.
2. Look at aluminum
1 look at the hardness of aluminum
Analysis: The aluminum in the shower room often needs to support the weight of dozens of kilograms or even hundreds of kilograms of glass. If the hardness and thickness are not good, the shower life will be short, so the hardness and thickness of the aluminum is an important indicator. The thickness of the qualified shower room aluminum is above 1.2mm, and the upper glass hanging glass should be 1.5mm or more. The hardness of aluminum can be tested by hand-pressed aluminum frame. Aluminum with a hardness of 13 degrees or more is difficult for adults to deform by hand.
2 See if the surface of the aluminum is smooth, with or without chromatic aberration and trachoma, and the profile finish.
Analysis: When the used aluminum scrap is processed, the smoothness of the surface is not enough, there will be obvious color difference and trachoma, especially the smoothness of the profile is dark.
3. Look at the pulley
1 look at the material of the pulley and the sealing of the wheel seat
Analysis: The wheel base of the pulley should use materials that are resistant to pressure and heavy, such as 304 stainless steel and high-end synthetic materials. The sealing of the wheel seat is good, the water vapor is not easy to enter the wheel, and the smoothness of the wheel is guaranteed.
2 look at the fit of the pulley and the aluminum track
Analysis: The pulley and the track should be tightly matched, the gap is small, and it is not easy to fall off when subjected to external force to avoid a safety accident.
4. See the adjustment function of the wall material (wall clamp)
Analysis: The wall material (wall clamp) is the aluminum material connected to the shower room and the wall. Because the tilting of the wall and the offset of the installation can cause the glass of the wall to be twisted, the glass self-explosion occurs. Therefore, the wall material should have a vertical and horizontal adjustment function, so that the aluminum can cooperate with the wall and the installation distortion to eliminate the distortion of the glass and avoid the glass self-explosion.
5. Look at the stability of the shower rod
Analysis: The pull rod of the shower room is an important support to ensure the stability of the frameless shower room. The hardness and strength of the tie rod are an important guarantee for the impact resistance of the shower room. It is not recommended to use a flexible lever, which is weak.
6. Look at the shower room water tightness
Analysis: The main observation area of ​​the watertightness of the shower room is
1 shower room and wall connection
2 door and door joints
3 hinges water tightness - hinges because of activities, water tightness is often bad
4 shower room and stone base, bottom basin connection
5Check the tightness of the strip and strip
7. Distinguish acrylic material
At present, the plates used in the shower room are mainly acrylic plates, and the glass wires used in some composite acrylic sheets contain formaldehyde. The way to distinguish the acrylic material is to look inside the shower room. If the back side of the acrylic board is different from the front side and is rough, it is a composite acrylic sheet. Acrylic sheets with poor material quality will change color when used for too long, and some will have small cracks. This is also the main reason why some brands have expensive shower rooms, and some are cheap.
8. Pay attention to steam engine and computer control panel when purchasing steam shower room
The core of the steam function is the steam engine. If the steam engine is not closed, it will take a long time to get bad.
The computer control panel is also the core of the shower room. Since all the function keys of the shower room are on the computer board, once the computer board has a problem, the whole shower room cannot be activated, so be sure to ask the warranty time of the steam engine and the computer board when purchasing.
9. Look at the brand and warranty period
The cost of renovation of the shower room is high. When choosing, try to choose the big brand that you can trust, and pay attention to the warranty period, which will ensure the service life.
Aluminum Diamond Plate 3003-H22 is easy to fabricate and its raised diamond pattern provides good slip resistance and walking stability.
Application and uses of Aluminum diamond tread plate 3003-H22 bright are: extensive product use as scuff plates, running boards, and mud flaps for fire engines, ambulances, fire trucks, trailers and toolboxes, recreational, and four-wheel-drive vehicles.
Aluminum Diamond plate sheet
Xiaoxian RuiYi Commercial Trade Co.,Limited , https://www.ryaluplate.com