How to take a ski lift when skiing

Skiing in the alpine ski area and taking a ski lift are essential experiences for every skier.

The ropeway of the ski resort is mainly divided into two types: closed and open. Take a closed cableway to separate skis from ski boots, and use snowboards and ski poles together with elastic straps to prevent them from being used when getting off the train. Forgotten on the ropeway.

In most ski resorts in China, ski ropeway countries are open type, divided into riding styles and towing styles. When skiers get in and out of this type of ropeway, the ropeway itself does not stop running, that is, skiers must complete the up and down in the ropeway operation.

When using a ride-in ropeway, all skis should be fixed on the retainer. After checking the firmness of the skis, the ropes of the ski poles should be put on the wrists, and then the skis should be moved parallel to the upper stop of the running ropeway, facing the running direction of the ropeway. Standing.

Put the barrage of the hanging chair of the cableway gently down and place the skis on the pedals of the hanging chair.

Note: Do not hang the skis directly under the chair to prevent the snowboard from falling off when the retainer is not locked. The skis must be held firmly by hand to hold the ski poles. The ski poles can easily fall off. Beginners often make the above mistakes:

When the cableway is about 10 meters away from the next station, the skis should be lifted away from the chair pedals to open the guardrail. At the same time, the body moves slightly forward. The skis are level with the ground. Hold the ski poles with both hands and lift upwards. Note: The ski poles must not come into contact with the ground in case the ski poles break during the operation of the ropeway.

After the snowboard is in contact with the snowboard, lift the buttocks a little and push the sticks backwards while pushing the snow on both sides of the snowboard. You can safely leave the ropeway. Note: After the person and the chair are separated, they must slide the pole firmly forward. If they are standing still, the hanging chair in the running will scrape the person. After leaving the cableway, slide forward as soon as possible to give the back People let off the ground to prevent collision.

Traction ropeways are suitable for slopes with slow slopes and short lengths. When used, the skier does not leave the ground and the skier is sent uphill by the tractor. There are two kinds of tractors, one is a card waist type and the other is a traction type. The Katy style has a beam on the wire, stuck at the waist of the skier, and lifts the skier up the hill. Traction is the skier will be a small disc sandwiched between the legs, through the sleeve connected with the traction wire, the skier will pull up the mountain. When using a traction ropeway to go uphill, wear full ski equipment. Hold the two skis in parallel and face the cableway running direction. When the hauler arrives, use the hand to hold the tractor at the waist or manually clamp the traction device on both legs. Between, you can run up with the traction wire. When you get to the next stop, loosen the tractor and force the ski pole forward to slide off the ropeway. Note that by keeping two skis parallel in operation, you can safely reach your destination. After releasing the tractor, slide forward as soon as possible, otherwise it will collide with the person behind.