Heat pump technology is known as one of the energy technologies of the 21st century. It is no exaggeration, because the use of heat pump technology can improve energy efficiency, which includes two meanings: the first layer, from the environmental point of view, the use of heat pump technology can reduce greenhouse gas emissions, reduce environmental damage; Heat pump technology can solve high power load. Therefore, heat pump technology relies on the advantages of energy saving and consumption reduction in packaging. The printing industry has gradually gained attention. So, what benefits can heat pump technology bring to packaging and printing companies?
As we all know, packaging and printing workshops often need constant temperature and humidity, office buildings and other places need air conditioning and refrigeration in the hot summer, while printing, coating and other processes need to dry hot air, and the use of heat pump technology can achieve effective energy utilization. The heat pump works on a heat booster that acts from the heat in the western zone of the surrounding environment and passes it to the heated object. This is like using a water pump to direct water from a low place to a high place. A heat pump can be used for a part of the office building and the like, and the heat generated by the heating end can be used for the printing and drying system, which can greatly save electricity costs. It is a good solution for environmental protection and energy conservation, and it is worth promoting. The author takes the application of heat pump technology on the satellite flexo printing machine as an example.
Application principle of heat pump on satellite flexo printing machine
The application of flexographic printing technology in China's printing industry is getting more and more attention. The green environmental protection of flexographic printing technology is undoubted, but its high energy consumption during drying has always been one of the factors restricting its development. The combination of heat pump technology and its application can effectively Solve this problem and bring more benefits to the printing industry.
At present, the air-energy heat pump water heater is used in the packaging and printing industry. The equipment obtains low-temperature heat source through natural energy (air heat storage), and uses the air cooled by the low-temperature heat source for workshops, office buildings, blown film machines, etc. Refrigeration; the heat released by the condenser is used to heat water, heat or supply hot water to the heat exchanger of the printing machine and the coating machine drying system to heat the oven air intake, and the whole system has high heat collection efficiency.
The drying principle of the satellite flexo printing ink is generally to heat the air by using a heat source (such as steam heating, electric heating, natural gas heating, etc.), and then blowing the hot air to the surface of the substrate at a certain wind speed, taking away the solvent in the ink. Achieve ink drying. The heat pump is applied to the satellite flexo press to realize the heating process: the heat pump heating device absorbs heat from the satellite flexo dryer drying oven exhaust, and transfers the heat to the fresh air that needs to be heated, thereby reducing the heat required for heating the heat source, thereby To achieve energy saving purposes. In addition to the obvious energy-saving effect, heat pump drying is also a uniform low-temperature dehumidification drying method, which can greatly improve the yield and the quality of printed products compared with the traditional hot air drying method.
How to choose heat pump for satellite flexo printing machine
In general, the satellite flexo press requires two drying units. A portion is between the printing color groups, commonly referred to as an inter-color drying device, the purpose of which is to allow the previous color ink layer to dry as quickly and thoroughly as possible before the print enters the next printing color group to avoid the latter color. The ink is mixed with the previous color ink during overprinting; the other part is after all the printing color groups, usually called the centralized drying device, the purpose is to completely eliminate the solvent in the printing ink layer, further consolidate the drying of the ink, so as not to Quality problems such as back smearing during rewinding or post-processing. The two principles of the satellite flexo press should follow the following guidelines when selecting a heat pump unit.
Connecting parts are used to connect parts. Connecting parts come in a variety of forms and shapes for use in different environments. The vast majority of connectors are made of metal to ensure strength. The most commonly used connection material is stainless steel, which has excellent rust resistance and high strength. Aluminum alloys can be used to make parts when lightweight is required. For daily necessities, sometimes the cost is required to be as low as possible. At this time, zinc alloys can be used to manufacture parts. From key chains weighing dozens of grams to lifting rings weighing dozens of kilograms, our company has complete specifications to provide customers with. If customers have special requirements, we can design and manufacture customized products. Only a small number of products are listed on the website, welcome to contact us for more detailed information.
Diving Hook Double Ended,Spring Snap Hook,Quick Link,Bolt Snap Hook Half Round Base
YRX Technology (Shenzhen) Co., Ltd. , https://www.yrx-tech.com