Multichannel Soxhlet Extractor Installation Guide
1. Place the casing on a workbench that is convenient for drainage;
2. Clamp the drain pipe with a clamp, subject to no water leakage, and then fill the water bath heating device with water and cover it;
3. Place the collection bottle on the lid and inject the reagent into the collection bottle;
4. Place the pulverized sample wrapped with filter paper in the extraction cup to ensure that the upper edge of the filter paper bag does not exceed the upper edge of the siphon tube in the extraction cup. After the filling is completed, the extraction cup is inserted into the collection bottle mouth;
5. Rotate the valve on the condensing return unit to the lateral direction (laterally closed, vertical open), insert the condensate return device into the extraction cup opening, and the plug valve facing outward. The upper part of the condensing device is fixed with a clip, and the standard is not to shake;
6. Cut the milky white silicone tube to the appropriate length, and connect the pagoda joint on the side of the condensing tube at one end (one on the side of the condensate tube is the water outlet and the bottom is the water inlet), and the other end is connected to the transparent pagoda joint in the lower left corner of the instrument. (The box above the transparent pagoda connector is the water inlet and the bottom is the water outlet);
7. After the above steps are installed, find a piece of silicone tube to connect the transparent pagoda joint to the external circulation to cool (if there is no external circulation, it can be replaced by tap water cooling) and group the cooling silicone tubes for experiment;
8. After all the steps are completed, plug in the power and turn on the switch (0 is off, 1 is on), the first button of the meter is the setting button, long press 5s to enter the temperature setting interface, start setting the temperature, press again Set the key, enter the time setting interface, set the time (the time starts when the temperature rises to the set temperature), after all the settings are completed, press the set button again to return to the initial working interface, and the instrument starts working.
SXT-02 Soxhlet extractor technical parameters
1. Scope of application: It can be used to extract various samples such as grain, feed, oil and soil;
2. Number of samples taken per batch: 2;
3. Extract bottle volume: 500ml / piece;
4. Extract sample amount: 0.5-20g / piece;
5. The extraction time is adjustable, and the alarm will be issued when it arrives;
6. The extraction solvent can be automatically recovered;
7. Temperature control range: room temperature +5 ° C ~ 100 ° C
8. Electric heating power: 300W;
9. Weight: 16kg;
10. Power supply voltage: 220V+10V frequency 50Hz;
11. Dimensions (mm): 750 × 360 × 550;
Jiangsu Sleeptight Household Technology Co., Ltd. , https://www.sleeptightoem.com