[ Chinese wardrobe network ] Now for some friends who work outside, the family basically buys folding wardrobes , so how to assemble the folding wardrobe? The following website will tell you about the folding wardrobe assembly steps and tell everyone how much to fold the wardrobe.
First, prepare to install:
Some of the steel pipes in the closet have the number marked, you can put them together with the number.
1. The bottom of the plate is seated and installed.
2. Classification of plates, such as: top plate, bottom plate, side plate, neutral plate, laminate, etc.
3. Position the classification board. For example, the top plate is on the upper side and the left side is right, and the bottom plate is in the lower line.
Second, the installation:
1. Install the cabinet face down, press left to right or right to left to install.
2. After the assembly of the board is completed, please ensure that the diagonal error of the cabinet is within plus or minus 1MM.
3. After the diagonal measurement is completed, please mark the position of the laminate or the vertical plate on the side plates (side plates) to facilitate the nail back plate Nails.
4. After the cabinet is placed in place, please use the level to measure whether the cabinet is horizontal. If it is not horizontal, please adjust it to the horizontal position. The common method is to put things under the cabinet.
5. After the cabinet is horizontal, it can be installed in order: clothes rail, drawer, door panel or sliding door. After telescopic mirror, install the handle according to requirements.
process:
1. Find the parts of the chassis and put them together. Note that it is only the bottom part. Some have a shoe rack, you must first install the shoe rack.
2, note that the second step is not to put the rest of the shelves, and the first on the cloth. Open the zipper of the cloth, and the place where the middle sticks is also pulled open, bottom down. There are some small holes dug in the bottom of the cloth. Pull the cloth from top to bottom according to each hole and pull down the vertical tubes. You can not pull to the bottom first.
3. Put the rest of the pipe in the cloth, then pull the cloth up, cover the top of the pipe, and adjust it until the cloth looks flat and there are no wrinkles.
4. Our installation is complete.
Note: Some are plastic interfaces, sometimes they are a bit tight. Don't use strong force to insert, accidentally crack, no place to buy accessories. Do not screw one on the screw interface, it will bring difficulties to the future installation. First loosely put the shelves up, and after loading them, use the screwdriver to tighten all the screws. This way you will get a sturdy cloth wardrobe!
How much is the folding wardrobe?
Recently, the folding wardrobe is very popular. It is built with a large number of thin steel pipes to form an integral steel frame. The crossbar can be used for hanging clothes. There are also a lot of iron frames underneath to place items, and then covered with a delicate soft curtain, it is perfect. It is. This kind of steel frame wardrobe has strong bearing capacity, can be combined freely, is easy to install, and takes up little space. It is beautiful and practical. Because of the use of steel, the price is expensive, about between 600 yuan and 1,200 yuan.
There is also a folding wardrobe that is made of high-density resin sheets. These resin sheets are semi-transparent and frost-like. They are light in texture and bright in color. They are embossed with beautiful surface and can be placed at home. Very good decorative effect, and the price is moderate, about 150 to 300 yuan.
The most simple folding wardrobe is the cloth wardrobe. It consists of support rods and fabrics. It is also very beautiful to use beautiful fabrics. There are clothes rails inside the cloth wardrobe, which can hang clothes, and several storage can be placed underneath. Box, the goods are sorted into different categories, this simple cloth wardrobe is affordable, about 70 to 150 yuan.
Galvanised Welded Wire Mesh provides a cost effective solution to all your requirements. From the lightest wire mesh rolls up to heavy industrial wire mesh panels; our extensive range is available with a heavy or light wire. You can use it to build security cages, enclosures or baskets, window grilles and safety guards. Whatever your requirement, we will have a mesh suitable for any application.
Assortments Available for galvanized welded wire mesh according to processing:- Electro Galvanized before Welding
- Electro Galvanized After Welding
- Hot Dipped Galvanized before Welding
- Hot Dipped Galvanized after Welding
|
Specification List of Welded Wire Mesh |
||
|
Opening |
Wire Diameter<BWG> |
|
|
In inch |
In metric unit(mm) |
|
|
1/4" x 1/4" |
6.4mm x 6.4mm |
22,23,24,25 |
|
3/8" x 3/8" |
10.6mm x 10.6mm |
19,20,21,22 |
|
1/2" x 1/2" |
12.7mm x 12.7mm |
16,17,18,19,20,21,22,23 |
|
5/8" x 5/8" |
16mm x 16mm |
18,19,20,21, |
|
3/4" x 3/4" |
19.1mm x 19.1mm |
16,17,18,19,20,21 |
|
1" x 1/2" |
25.4mm x 12.7mm |
16,17,18,19,20,21 |
|
1-1/2" x 1-1/2" |
38mm x 38mm |
14,15,16,17,18,19 |
|
1" x 2" |
25.4mm x 50.8mm |
14,15,16,17,18,19 |
|
2" x 2" |
50.8mm x 50.8mm |
12,13,14,15,16,17,18 |
|
3" x 3" |
75mm x 75mm |
16,17,18 |
|
4`` x 4`` |
100mm x 100mm |
12,13,14,15,16 |
|
6`` x 6`` |
150mm x 150mm |
12,14,16 |
|
Technical Note: |
||
Galvanized Welded Wire Mesh,GAW 2x2 Welded Wire Mesh,Galvanized Aviary Welded Wire Mesh,High Rib Expanded Metal Lath
DINGZHOU TIAN YILONG METAL PRODUCTS CO., LTD. , https://www.wiremeshsolution.com