When we choose the plates, we need to contact them more or less. I believe that not many people can really understand the difference between so many plates. By breaking the casserole and asking the end, I will come to organize and study today.
Nowadays, all kinds of plates that appear on the market are believed to be unfamiliar to people, because the name of the plates is a bit too much, such as: solid wood panels, ecological panels, integrated panels, finger joints. Board, wood board, veneer, MDF, particle board, multi-layer board, nine PCT board, three PCT board, gypsum board. . . and many more.
In the home decoration, a lot of decoration plates are needed. At present, the quality of various plates on the market is mixed. The top ten brands of Chinese plate artisan plates remind consumers that when choosing, they must be scientifically selected. Pay special attention to the following points:
First, recognize the difference between artificial veneer veneer and natural wood veneer veneer: the texture of the former is basically straight texture, the texture pattern has rules; while the latter is natural wood pattern, the texture pattern is natural, the variability is relatively large, and there is no rule. .
Second, observe the appearance of the board. The appearance of the board should have a good aesthetic, the material should be fine and uniform, and the color is clear. The wood grain is beautiful, the texture of the matching board and the parquet should be arranged according to a certain regularity, the wood color is similar, and the seam is almost parallel to the edge of the board.
Third, the surface should be no obvious defects. The surface of the material with good material should be smooth, free of burr groove marks and planing knife marks; there should be no penetration phenomenon and surface contamination (such as local yellowing and blackening); the surface should be selected as follows without cracks, cracks, no knots, The skin, the resin capsule and the gum road; the natural warpage of the whole board should be as small as possible to avoid the sand penetration phenomenon caused by the improper operation of the sanding process and the substrate.
Fourth, the rubber layer structure is stable, no open glue phenomenon. It should be noted that there should be no bulging or delamination between the surface veneer and the substrate and between the layers inside the substrate.
Fifth, choose a plate with low formaldehyde emission. Decorative panels with a pungent odor should be avoided. Because the greater the odor, the higher the amount of formaldehyde released, the more harmful the pollution, the greater the harm.
6. Choose products with a clear production enterprise. Products with a clear factory name, site and trademark should be selected.
Seventh, for the judgment of the decorative layer of the wood veneer, the inferior board with the nails gently swiping on the board surface will leave a clear impression, and the quality veneer will not have these problems.
The products of the fine artisan brand series have: super wear-resistant and scratch-resistant, the board is long-lasting; super -resistant , easier to care; high-efficiency moisture-proof, more stable plate shape.
Shanghai Huagang Wood Industry Co., Ltd. has been committed to the development of decorative sheet metal industry. It is the first in the industry to launch the ultra-environmental product of 'fine art craftsman' brand "net aldehyde ecological board". It belongs to non-formaldehyde series, completely away from formaldehyde, benzene and other harmful. The harm of the substance to the human body while retaining the aroma of natural logs. Fine artisan is one of the top ten brands of environmentally friendly plates in China and is an ideal choice for your home improvement.
Aluminum Frame Case,Aluminum Case For Makeup Tools,Aluminum Tool Case With Key Lock,Aluminum Case For Makeup Tools
Changzhou Junye Aluminum Case Co., Ltd , https://www.junye-box.com