Wardrobe sliding door track installation

[ Chinese wardrobe net ] Most home wardrobes now use sliding doors. For the installation of wardrobe sliding doors, many consumers have some confusion. Xiao Bian believes that the core of the wardrobe sliding door installation is the installation of the track. Therefore, the next small series will introduce you to the detailed installation of the sliding door of the wardrobe.

Sliding doors originated in China and spread to North Korea and Japan through Chinese culture. From the meaning of words: push the door to pull; from the material point of view: there are wood, metal, organic, inorganic materials; from the use: for bookcases, closets, bedrooms, living rooms, showroom doors .

The use of sliding doors in the bedroom closet not only makes us easy to operate, but also easy to operate, energy saving and environmentally friendly. In some bedroom wardrobes, there are also elastic stretching equipments. Any upgrade, simple and practical, reflecting the unique design idea, so in the wardrobe, where is the drawer, where is the partition, where to put the clothes, will be You arrange, even towels, socks, and ties. Everyone in the wall cabinet is also equipped with a trousers rack with pulleys. You can hang up a dozen trousers neatly, keep it ventilated, no wrinkles, at a glance, and easy to take. .

The sliding door rails are made of aluminum alloy profiles, high-grade copper, and engineering plastics. The track of the sliding door is very important, because the door is heavy and the required track is good to catch the door, so that it is safe. Aluminum alloy tracks are more commonly used, the best is only 30 yuan, in general, between 18-23. The sliding door is reasonably used for installation, so that the sliding door is silent and enjoy the good home environment is our necessary quality of life.

The sliding door track is the core component of the sliding door. The main thing to install the sliding door is to install the track. The track is almost ready to be installed.

1. The size of the track box on the upper part of the sliding door should be 12 cm high and 9 cm wide. Like the curtain box, a rail is mounted in the track box to suspend the sliding door from the rail. When the height of the door is less than 1.95 meters, it feels very depressed. Therefore, when doing sliding doors, the height must be at least 195 + 12 = 207 cm.

2. The gold size of the normal door is about 80 cm × 200 cm. Under this structure, the door is relatively stable and beautiful. Therefore, the ratio of the width and height of the sliding door should be similar to the size of the gold.

3. Use the sliding door (bright hanging track box) from floor to top with caution. Since the swing amplitude is too large when pushing and pulling, the sliding door is easily deformed after a long time, and the door cannot be opened after the deformation, which means that it cannot be repaired and cannot be used.

4. Finally, install the sliding door track: fix the upper rail, use the gravity cone (hanging hammer) to hang 3 points on the upper and middle points of the upper rail and draw a 3.3-point surface with the oil pen on the ground, install the upper rail, then Put a hammer to the ground at the center point of the upper track. Vertical lines should be placed at both ends of the track. The lower track is fixed at these three points to ensure that the upper and lower rails are completely parallel, and the sliding of the sliding door is optimal. The state is gone.

In order to ensure the smooth installation of the sliding door of the wardrobe, Xiaobian needs to remind you of the following points:

1. Since the sliding door is in contact with the wall or the sides of the cabinet, there is no other object in the contact position to block the closing of the sliding door. For example, the position of the drawer in the cabinet should avoid the intersection of the sliding door and be at least 1cm higher than the bottom plate; the drawer in the folding cabinet should be at least 15cm away from the side wall. Pay special attention to the power switch and socket on the wall. The sliding door should be closed and the position of the switch and socket should be changed.

2. Regardless of the ground on which you make any material, you must ensure the level, and the walls of the door opening should be horizontal and vertical. Otherwise, the door will be skewed after the installation is completed. The adjustable error is no more than 10mm.

3. Please do not install the kick line in the installation position. The plaster line can be installed on the sealing plate above the wall cabinet. If the door is directly to the top, do not install the plaster line. A carpet of less than 5 mm thickness will be cut off from the carpet at the location and directly attached to the lower rail. For carpets with a thickness of 5 mm or more, if the double rails are installed, they can be directly screwed to the carpet: if the monorail is installed, the carpet at the location must be cut off, and the 3-5 mm thick wooden strips should be placed in advance to paste the monorail directly. Above. The combination of wooden floors and tiles, most of which occurs between the balcony and the living room as well as between the bedroom and the living room. The solution is as follows:

(1) Install the lower rail on a material as much as possible;

(2) Add a piece of wood or marble with the same width as the lower rail between the two materials. A threshold stone can also be used in the kitchen.

For the detailed information about the installation of the sliding door of the wardrobe, Xiaobian is here for everyone. Mastering some of the common sense of life can not only facilitate our lives, but also be a little fun. More exciting, please stay tuned for this website.

Workstations

Workstations,High Quality Workstations,Workstations Details, CN

Queen Furniture Co., Ltd. , https://www.queenfurnitures.com

Posted on