[ Chinese wardrobe network ] Nowadays, all kinds of wardrobes on the market are very eye-catching, but sometimes you can't choose what you are suitable for. However, the customized wardrobe can determine the size, material and style of the wardrobe according to your needs, to meet the various needs of everyone. At the same time, it also satisfies some of the personality, alternative and maverick personality of young people. So when we customize the wardrobe, we need to pay attention to many places, such as the choice of materials, the installation of the wardrobe with mirror doors. Today, Xiaobian will tell you about the precautions for the installation of custom wardrobes with mirror doors.
Installation Note 1: Check the materials
After the wardrobe door with mirror door material is transported to the site, all materials should be inspected, meet the design requirements, check whether the size of the mirror door is correct, the diagonal deviation should not be greater than 1mm, and the door clamp, floor spring and handle specifications are correct. Whether the accessories are complete, after inspection, should be stored in a safe place, properly preserved, and covered for protection.
Installation Note 2: Punch positioning and installation of the door clamp
When installing the door clamp, use the door clamp to accurately mark the installation position line and the punching position on the mirror with the door and carefully remove the excess part with the pliers. Then drill the hole with the hand drill and the 18 mirror drill bit. Punching should be carried out gently and swayingly. It should be added with water. Do not press down when it is fast, so that it will naturally fall through, so that the perforated part has a mirror surface intact.
Installation Note 3: Install the door leaf
Remove the door clamp (F20) pre-installed on the door leaf and place the door leaf on the ground spring (use the plywood in the wardrobe with the mirror door and the mirror frame or other door frame to protect the mirror door and its door frame) Not damaged.), and on the same plane with two borders or mirrors, after the door leaf is placed, insert the F30-F40 upper door clamp shaft into the F20 upper door clamp sleeve, and reinstall the upper door clamp F20 on the mirrored door leaf. After the installation is completed, the adjustment is made. The switch is flexible. After the adjustment, the mirror rubber with the door clamp and the small wooden wedge with the mirror knife are cut flat than the upper end of the lower door clamp, and the glue should not be protruded outside the door clamp, and Clean and re-glue for modification.
Installation Note 4: Measuring distance and mounting handle
The handle between the handle and the mirror door is 120-150mm, and the installed door handle ensures symmetrical, vertical and firm.
Installation Note 5: Wardrobe Cleaning
After installation, use the mirror cleaning agent to clean the stain on the mirror door of the wardrobe to ensure the cleanliness of the wardrobe door.
Interactive conference teaching touch all-in-one machine, integrating Windows and Android dual systems, injecting AI elements, focusing on multiple human interactions, display, movement, and interaction usher in a new smart classroom and smart conference, widely used in multimedia teaching And meeting scenes.
Our factory has a professional interactive whiteboard R&D team, has Conference Interactive Whiteboard, Teaching Interactive Whiteboard, conference all-in-one machine and interactive smart board full production line of products, and the products sell well at home and abroad.
Conference Interactive Whiteboard,Teaching Interactive Whiteboard,Conference All-In-One Machine,Interactive Smart Board
Guangdong Zecheng Intelligent Technology Co., Ltd , https://www.zechengsecuritys.com