[ Chinese wardrobe network ] Nowadays, the living environment of many student groups and white-collar workers of office workers is generally relatively stable, so when the space of the rented house or dormitory is not enough, the best way is not to purchase again. A tens of thousands of whole wardrobes , but the purchase of a very portable cloth wardrobe , cloth wardrobe with its own portability is very popular with people, and has even become the best choice for ordinary families, then everyone knows cloth wardrobe How to make it, we will introduce it to you today.
Cloth wardrobe introduction:
Cloth wardrobe is a very simple wardrobe for assembly and disassembly. It consists of a non-woven fabric and a frame for easy carrying. Cloth wardrobe is a simpler wardrobe than ordinary wardrobe, which is generally composed of cloth cover and frame; most simple wardrobe cloth covers are made of non-woven fabric, some of the frame is made of steel pipe, and some are made of solid wood; The assembly is much simpler than the ordinary wardrobe. It can be done in ten minutes. When you move it, you can install it in a small box, which is very convenient.
How to make a cloth wardrobe:
The first step: When purchasing a product, it is recommended to check whether the packaging is damaged. If it is, it may be crushed by the steel pipe of the cloth closet. In this case, it cannot be purchased, otherwise it will be a loss.
Step 2: After opening the package, check the accessories inside to see if they are all complete. Each product will be accompanied by instructions, which can be verified according to the instructions. If the parts are missing, it may be impossible to assemble a complete cloth wardrobe. It is recommended to wear gloves when installing.
The third step: first install the middle of the bottom one, take the bottom with the high four-way joint, the middle is connected with a short tube. Install a four-way connector on each side and then install the tube on both sides. You can install long tubes on one side and short tubes on the other according to your needs. Then install the bottom on both sides and install a three-way connector on each side.
Step 4: After the bottom is installed, insert six short steel pipes, and then put the cloth of the cloth closet on the surrounding holes, then install a layer of baffle similar to the bottom and put it on the six steel pipes. .
Step 5: If the wardrobe is divided on both sides, first follow the short-side floor, first insert the side steel pipe, and then install the spacer. After that, connect the four-way joint, install two horizontal steel pipes, install the cloth, and then fill the four-way joints on both sides. Finally, the partitions are all installed.
Step 6: After the short side partitions are installed, the long side is a vertical hanging area, and the three long joints are connected in the middle to the top position.
Step 7: After both sides are installed, connect them directly with long steel pipes. The wardrobe is too high, not enough to squeeze, can be pushed back sideways, it will be more convenient to install. At the same time, the hanging steel pipe is also mounted with a hook joint.
Step 8: When it is placed on the top of the cloth closet, it is recommended to pull the bottom to the upper point until the top is installed diagonally. At this point, the cloth cover can be pulled down and the cloth wardrobe is installed.
In the above, we introduced some knowledge points about the cloth wardrobe, because we all know that the cloth wardrobe is a very light furniture, the structure can also be seen at a glance, it can be seen that the production process is quite simple, everyone is Before you make it, you only need to prepare enough materials. The combination of these materials is actually a simple cloth wardrobe. After using it, the method of removing the cloth wardrobe is similar. I believe you have done it once or twice. Will be very skilled.
If the dog trembles for no reason, does not like to go out and does not like to move, curled up in a den or leaning against a warm place, it proves that it really feels cold and should wear clothes at this time. The purpose of dressing a dog is to protect the stomach, which is the area most susceptible to cold due to sparse hair.
For puppies and short-haired small dogs, dogs who are sick or during pregnancy, dogs with weak physique and insufficient heating at home, dogs sleeping on the floor, it is necessary to prepare a set for them when the temperature is low Warm clothes.
Be careful when buying, choose pure cotton and breathable clothing, and don't buy it for the sake of fashion and beauty. You can soak and dry the clothes after you buy them. Don't dress your dog immediately after taking a shower. Make sure that the hair is blown dry before putting on the clothes. When the dog comes back from playing, if the clothes are already wet, change them in time, otherwise it will be easier for the dog to catch a cold.
Dog Clothes,Warm Dog Clothes,Windproof Dog Winter Coat,Christmas Style Pet Clothes
DongGuan Lucky Pet Products Co., Ltd. , https://www.dgpetproducts.com