Ceramic tile adhesive is a commonly used material for ceramic tile application. Compared with traditional adhesive materials, it has better effect, time saving and convenience. Today I want to introduce you to the content of Tom Tile Adhesive, so is the brand of Tom Tile Adhesive , how to use tile adhesive? Let's take a look!
Tom tile adhesive brand is okay
1. Although the ceramic tile adhesive is not as famous as the adhesives of other big brands, its use effect is very good, and it is trusted by consumers. Tang tile adhesive is made of cement + grading sand + polymer admixture through modern technology. It is mainly used to paste tiles of various specifications and materials. Its advantages are time saving, material saving and low cost. , Safe and reliable advantages.
2. The Tom tile adhesive brand occupies an important position in the industry. It is made of a mixture of different materials, such as cement, fillers, and pigments, and is used to fill gaps between tiles. It cooperates with decorative materials such as ceramic tiles and stone materials, and can provide beautiful decorative surfaces, as well as improve the adhesion and anti-seepage between decorative bricks.
Advantages of tile adhesive
1. The use of tile adhesive is very simple, as long as it is directly mixed with water, it can be used, and there will be no problems with the tiles it is pasted. The bonding strength is 4 times that of cement. It is easy to operate before sticking. Unlike cement, it is necessary to soak the tiles first, and the adhesive layer does not need to be wet. It is time-saving and convenient.
2. During operation, the tooth spatula is used to apply the adhesive. The amount of adhesive is small and uniform, and the thickness is only 3 mm, and the phenomenon of hollow tiles will not occur.
3. The adhesive has good water resistance, moisture and impermeability resistance, and is relatively flexible in physical strength, will not cause force on the tile and cause the tile to crack, and can withstand cold and hot cycles without detaching from the base layer.
How to use tile adhesive
1. Base layer treatment: When using tile adhesive, the surface of the tile needs to be cleaned first, because the adhesive has high requirements on the surface of the base layer, so the base layer needs to be treated very clean and flat, so that the effect of the paste will be it is good.
2. Preparation of adhesive glue: Mix the adhesive with clean tap water according to the specified ratio, and stir evenly to adjust the slurry to a suitable consistency. After standing for 10 minutes, stir thoroughly to restore the original consistency. Use, when stirring again, generally do not need to add water.
3. Pasting method: when pasting, you need to use a trowel or tooth-shaped scraper to apply the glue to the base surface, and rub or press the ceramic tile and other decorative materials on the glue, and put it on the glue. Apply the mixing glue to the back of the tile, rub it firmly against the wall, straighten it, and scrape off the excess glue.
4. After tiling the tiles for one day, the tile joints should be processed.
Regarding the knowledge of Tom tile adhesive brand and how to use tile adhesive, the editor briefly introduces it here, hoping to help everyone! In general, Tom tile adhesive is also a very good brand , Those who need decoration can consider it!
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
Anping Chuangqian Wire Mesh Co., Ltd , https://www.cqwiremesh.com