In real life, almost everyone who has used a printer has encountered printer jams, and printer jams are a headache. What about printer jams ? The following decoration home decoration network Xiaobian will bring you a printer jam solution, I hope to provide help for everyone.
What should I do with the printer jam?
Printer jam solution 1. Unplug the power, open the printer cover, and raise the stand. We first remove the paper from the tray area, slide the tray out of the printer, and remove the damaged paper from the tray. If you can see the edge of the paper in the feed area, slowly pull the paper out of the printer. If you cannot see the paper, look for the paper in the top cover area. If the paper is attached to the tray, try removing it from the top of the tray or from the top cover area.
Printer jam solution 2. Open the top cover and close it to clear the jam message. If the jam message still shows, there is a paper jam inside the printer. Looking for paper jams. Clear the jam from the top cover area, open the top cover, and remove the print cartridge. To prevent damage to the printed flour box, do not expose it to sunlight for more than a few minutes. Pull the paper slowly out of the printer. Close the paper check port cover, reload the print flour box, and close the top cover. If the jam message is still displayed, there is a paper jam inside the printer.
Printer jam solution 3. Clear the jam in the output area. If the paper is jammed in the top output area, but most of the paper remains in the printer, it is best to remove the paper through the rear door. Push the two gray latches and release the rear door. Push the green paper down to release the handle, grab the sides of the paper, and slowly pull the paper out of the printer. If it is difficult to remove the paper, open the top cover to remove the print cartridge to reduce the pressure on the paper and close the rear door. Open the top cover and close it to clear the jam message. If the jam message is still displayed, there is a paper jam inside the printer.
Printer jam solution 4. Clear the jam in the optional duplexer, slide the tray out of the printer, slowly pull the paper out of the printer, reinstall the front cover of the duplexer, and reload the tray. .
Printer jam solution 5. If the card is at the exit, when the inside is cold, turn it back on. When it is warmed up, the paper will automatically come out.
Printer jam solution 6. When taking paper, be sure to protect the sensor. After the paper is removed, the printer can be reset, the alarm will be cancelled, and the printer can perform the print job normally.
The above is what the small series brings to you printer jam? The whole contents of the printer jam solution, I believe that everyone has a basic understanding of how to do printer jam after reading this article, if you want to know more about decoration consultation, please click to enter the decoration knowledge channel .
More related wonderful reading:
How much is the printer? Printer price summary
How to install a printer? Printer installation steps
How to share a printer? Printer sharing setting method
How to use the printer? How to use the printer?
What is a printer? Which printer is better?
Stainless Steel Vacuum Can Coolers are made from high-grade 18/8 stainless steel. This material is food grade, non-toxic, durable and easy to clean.
And we got a lot of different kinds of Stainless Steel Bottles. For example: Stainless Steel Cola Bottle, a classic design that is popular in the market and easy to use, also looks good. Speaking of looking, our Cola Bottle comes in changeable colors and diverse patterns.
Double Walled Vacuum Can Cooler,Vacuum Insulated Can Cooler,Promotional Vacuum-Insulated Can, 12oz Vacuum Can Cooler,Vacuum Insulated Stainless Steel Can Cooler
Ningbo Auland International Co.,Ltd. , https://www.everwaterbottle.com