[ Chinese wardrobe net ] Maybe you are not sure what the key point is when you buy the wardrobe , then Xiaobian is here to tell you that the wardrobe door is an important factor to consider. The selection of the wardrobe is the most important thing. Let's take a look at it. Take a look at what you need to know.
Wardrobe door - choice of plate type
There are many kinds of good sheet base materials, but in returning to the most basic excellent materials, there are two types: MDF and particle board.
The MDF is made of wood fiber or other vegetable fiber as a raw material, and an artificial plate made of resin or other adhesive is applied. According to the density, it is divided into high density board, medium density board and low density board. The surface of the MDF is smooth and flat, the material is fine, the performance is stable, the edges are firm, and the surface is decorative. However, the density of the MDF is poor, and the nail holding power is worse than that of the particle board.
Particleboard is a kind of granules made of wood or other lignocellulosic materials, which are coated with an adhesive and glued under heat and pressure. The finished particleboard can be used directly, and the sound absorption and sound insulation properties are also very good. However, it also has its inherent disadvantages. Because the edges are rough and easy to absorb moisture, the edge-sealing process made of particleboard is particularly important. According to the raw materials used: wood particle board; bagasse particle board; bamboo particle board; cement particle board; gypsum particle board.
Another important recommendation is the solid wood particle board. It is a type of particle board made of wood or other lignocellulosic material, with fine wood fibers on both sides and long wood fibers in the middle. The adhesive is then applied and then gelled under heat and pressure. It is a plate produced by the particleboard process, but it is a new type of high-grade environmentally friendly substrate. It is widely used by furniture manufacturers in Europe and the United States. The domestic high-end panel furniture market has begun to adopt this type of plate in large areas.
Wardrobe door - door panel thickness
The thickness of the door panel of the whole wardrobe should preferably be 18 mm to 22 mm, which is more stable and durable. The thickness of the glass is generally 5 mm to 10 mm. Too thick and too thin will result in the use. Insecure.
Wardrobe door - material environmental performance
The environmental protection of the overall wardrobe is the key. Some wardrobes have been scented for two years, and the overall wardrobe door material is not selected. Therefore, it is best to choose the whole wardrobe cabinet door, such as Hao Laike, Kohler and other famous brands. These brands choose E1 grade (formaldehyde emission ≤1.5mg / L) and even release the environmentally friendly sheet, can be used with confidence.
Wardrobe door - the degree of solidity
The overall wardrobe door must be made of high hardness and strength to ensure that the use is not deformed. The industry generally uses carbon steel and aluminum as the overall wardrobe door material. You can feel the hardness of the door by tapping; feel the strength of the door by shaking.
These are the options for the wardrobe door. If you want to choose a wardrobe carefully, you really have to think about it.
Chainsaw: Gasoline chainsaw. This is the smallest kind of chainsaw. It is powered by a small two-stroke gasoline engine, similar to the Brush Cutter, Outboard Motor, driven by a sprocket, and runs on the guide board through a dedicated cutting saw chain to achieve the purpose of cutting and pruning wood, branches, ice and other themes. Mainly used for landscaping pruning, replacing the special guide board can be used as a large wood carving, ice carving large outline modification
Chainsaw products have many advantages, such as large power, small vibration, high cutting efficiency and low cutting cost. It has become the leading hand-held logging machine in the forest area.
The chainsaw shock absorption system uses springs and high strength rubber shock absorption. Sprocket form for positive teeth, make the assembly chain more simple and convenient!
Excellent and reliable ignition device, oil supply system using adjustable oil pump.
Before use, you must read the operation manual carefully to understand the characteristics, technical performance and precautions of the chainsaw.
Before use, the fuel tank, the fuel tank of the machine to add enough oil; Adjust the tightness of the saw chain, neither too loose nor too tight.
Before operation, the operator should wear work clothes, helmet, protective gloves, dust-proof glasses or facial protective cover.
After the engine starts, the operator holds the rear saw handle with his right hand and the front saw handle with his left hand. The Angle between the machine and the ground should not exceed 60 degrees, but the Angle should not be too small, otherwise it is not easy to operate.
When cutting, cut off the lower branches first, and then saw the upper branches. Heavy or large branches should be cut in sections.
petrol chainsaw,chain saw attachment,top handle chain saw
Shaoxing Haotuo Machinery CO., LTD. , https://hotochainsaw.com