With the rapid development of science and technology, people's lives with each passing day, life products are also accompanied by the simultaneous development of high-tech. Many companies now use fingerprint attendance machines to attend employees' attendance. Fingerprint attendance machine has become a good helper for attendance and is the primary choice of many companies. Then how to use the fingerprint attendance machine, the following detailed introduction to everyone.
The fingerprint attendance machine random distribution software includes two parts: the foreground system and the background management system. Among them, the front-end system includes two modules: fingerprint sign-in and fingerprint registration; the background management system includes four modules: basic information management, data management, attendance management, and salary management.
The working principle of the fingerprint attendance machine: the laser scanner on the fingerprint attendance machine scans not your finger, but the indentation formed when your finger touches the scanning window, whether the attendance machine uses blue laser or red laser. The scanned images are transmitted to the arithmetic circuit in black and white.
Fingerprint attendance machine use steps: 1, the fingerprint attendance machine is powered on, open the machine, so that the machine is in normal working condition.
2. On the fingerprint attendance machine operation panel, press the main menu [MENU] – [User Management] – [User Registration] – [Fingerprint Registration], the screen prompts “New Registration?â€, press [OK], this time you need to enter the employee. The job number and name, etc., press [OK] after inputting, and the screen prompts: "Please put your finger".
3, pay attention when putting your fingers, the body of the collected person should stand up against the attendance machine. Put the 2/3 position from the fingertips very flat and place it flat on the glass piece of the collector. Do not slide your finger, press it gently, and hear the “click†to remove the finger, and also make the 2nd and 3rd presses. Press 3 times to collect a complete fingerprint.
4. After 3 or more presses are completed, press [OK] to save. The fingerprint attendance machine prompts at the screen: 'New registration? 'We can press the [ESC] button to register for backup. Each employee can collect at least 2 fingerprints in case one of them has wear and tear.
5. After the backup is completed, press [OK] to save. The fingerprint attendance machine prompts: “Continue backup?†If you want to continue the backup, please press [OK], to end the backup, press [ESC] and proceed to the next one. Fingerprint registration of employees.
6. After the fingerprint registration is completed, the registered finger can be used for fingerprint attendance. It can be carried out according to the pressing method when collecting the fingerprint. After pressing, the fingerprint attendance machine screen displays the employee's job number and name, accompanied by the machine voice prompt "thank you." If the pressing is unsuccessful, there is a voice prompt "Please press the finger again", at this time, please press the finger again or replace the other finger to press.
Well introduced to now everyone should be aware of the working principle and use steps of the fingerprint attendance machine, I hope this article is helpful to everyone. Choosing a good attendance machine is very important for the company. As a senior office worker, the company's office supplies are carefully purchased at the Klip Mall. Here, the factory direct sales, reliable quality, and after-sales protection.
Transfer Patient Lift,Bariatric Patient Lift,Patient Lifting Device,Battery Powered Patient Lift
Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jmmedicalequipment.com