In the daily cleaning or use of gas stoves, it is often encountered that the liquid such as water or soup is accidentally sprinkled onto the gas stove of the gas stove, which causes the gas stove to fail to catch fire, thus affecting our normal use. Let's analyze the reason why the fire can't be fired: When the stove eye enters the water, it should be turned upside down to dry the water, or blow it dry with a hair dryer, and let it dry for a day and a half, wait until it is no longer water, and try to catch fire. If you still can't beat it, you can borrow an open fire to try to open it. Today, Xiaobian will explain the problems related to the water intake of the gas stove .
First, we must ensure that the gas stove and gas switch, stove, battery and other parts are clean and no water. Then check each part further:
1. Battery problem: The battery is installed in the battery case at the bottom of the stove, which is obvious. Change the battery first, then debug the damper. Generally feel appropriate in the middle position. Then use the wire to squint the hole and see if there is any blockage.
2. When you turn on the gas stove, you can hear the sound of the cockroach. It is the sound of the gas, indicating that there is gas coming out. If the fire is not hit, use an open flame (lighter to point it), you can’t keep it Exhale, either point the gas or turn off the gas to prevent accidents.
3, see if it is a thermal needle problem, if there is alcohol at home, you can also take a chopsticks with a little alcohol, then point, then hit the gas stove, the flame into the small mouth of the electric fire, if the stove is angry Let it burn for a while and then close the valve. It will be repeated several times.
Second, the gas stove water intake matters needing attention
1, the gas source is different, the gas stove used should also be different, please pay attention when purchasing. If the gas source you have used has changed, be sure to ask the original manufacturer to modify the stove before using it.
2. The gas pipeline is easy to aging and rupture. The interface and bending of the pipe should be checked frequently. If there is damage, it should be replaced immediately, or replaced once every 1~2 years. It is best to use a rubber tube that is resistant to oil and pressure.
3. When using a gas stove, people should not stay away. In the event of a leak or accidental cause (wind, water, etc.), the flame should be turned off immediately, the air source main switch should be turned off immediately, the doors and windows should be opened, and the air should be ventilated quickly. Remember not to ignite or switch the electric appliance to prevent the electric spark from detonating the gas.
The above is a detailed answer to the water heater's water intake. I don't know if you are satisfied with the introduction of the decoration home network Xiaobian~ If you want to know more about the gas stove water intake, please continue to pay attention to it. Our kitchen and bathroom appliances section!
More related wonderful reading:
What should I do if the gas stove enters the water? Gas stove water intake solution
Ningbo XISXI E-commerce Co., Ltd , https://www.petspetscleaning.com