Full version of dirty on the fast processing

Dirty on the full version refers to the lack of water in the stencil printing, or the automatic shutdown of the water supply system due to malfunctions, and the forgetfulness of the discharge roller support. Called paste version). In such cases, the commonly used method is to stop the use of water and cloth to wipe the water, which is a waste of time.

Because the printing plate is piled with ink, strong stickiness, easy to stick on the water cloth, make the water cloth slippery, it is difficult to clean the layout. If the water cloth adheres to foreign materials, it is easy to scratch the plate. The processing method we used was to run the machine first, then put down the water roller and manually drop the ink roller, and immediately sprinkle water between the plate roller and the plate so that the dirt on the plate will disappear instantly. At this time, the ink roller and the water roller are set up again, and the stoppage of the blanket is cleaned with gasoline. Finally, look for the dirty original team on the plate to handle it.

This full version of the dirty method of treatment, the advantages are fast, simple, and will not damage the layout.