PV ground screw is a new type of solar photovoltaic supporting product, suitable for various solar photovoltaic, wind energy and construction industries, such as solar power station pile foundation, billboard pile foundation, sign flag pile foundation, wooden house pile foundation, etc., suitable for Various geology, such as clay, Gobi desert, gravel, etc., are favored by industry counterparts for their high load performance, stability, anti-settling and pull-out properties.
PV Ground screw is also called spiral ground pile, hot-dip galvanized spiral ground pile
Product specifications
Outer diameter 60mm---3000mm carbon steel Inner diameter 20mm---2500mm alloy steel
Pitch 60mm---3000mm stainless steel thickness 1.0mm---60.0mm
Detailed introduction:
Photovoltaic solar spiral pile is a kind of spiral drilling pile. Its characteristics include the connection of drill bit and drill pipe, drill bit or drill pipe connecting a power source. After this photovoltaic solar spiral pile is placed underground, it will no longer Take it out and use it directly as a pile.
The drill bit of the photovoltaic solar spiral pile includes the spiral drill bit at the bottom.
Specific structure:
1. Use steel pipe in the middle part
2. The top is the connecting pipe
3. The drill pipe of the photovoltaic solar spiral pile includes the upper connecting pipe
4. Steel rod in the middle part
5. The lower connecting shaft
6. After the pile is driven into the ground, it is no longer taken out, but used as a pile directly.
On the basis of the "end-bearing pile" structure and "friction pile" structure used in the construction process, it is widely used in the construction of a variety of ground piles, ground anchors, and randomly structured ground piles.
Photovoltaic(Pv) Ground Screw,Fence Post Ground Screw,Post Ground Screw,Screw Type Ground Anchors
China Senbo Industry Co.,ltd , https://www.yylpaper.com