"Cable float level switch"

"Cable float level switch" KEY cable float level switch TEK cable float level switch KEY / TEK cable float level switch

KEY / TEK cable float level switches are sold to Shandong, Hebei, Henan, Anhui, Liaoning Shandong-Jiangsu-Jiangxi-Hebei-Henan-Zhejiang-Liaoning-Tianjin-Dalian-Xinjiang-Gansu-Sichuan-Guangdong-Guangxi-Anhui- Fujian-Hubei-Hunan-Chongqing-Yunnan-Ningxia-Inner Mongolia-Jilin-Shanghai-Guizhou-Shaanxi-Shanxi and other parts of the country are free of maintenance, non-toxic, environmentally friendly, stable performance, low price
1. Hydropower industry: water level control and alarm for water collection wells, clean water wells, roof drainage, domestic water towers, storage tanks and front tanks;
2. Water supply and drainage industry: water level alarm and control of mixing tanks, sand filter tanks, sedimentation tanks, water intakes, storage tanks and water towers of waterworks;
3. The water level control and alarm of the digestion tank of the sewage treatment plant, the initial settling tank, the balance tank, the sewage tank, the aeration tank, the sewage grid, and the concentration tank.

1. Performance characteristics (tek-1) key cable float level switch is a control device that can adjust the liquid level in the barrel, tank or well. It is automatically adjustable, easy to operate, easy to install, safe and reliable, maintenance-free, non-toxic and environmentally friendly. It has resistance to sewage, and is widely used in households, factories and mines, pools, oil, acid and alkali pools, barrels, tanks, irrigation and other containers. If two controllers are connected. One is placed in the water tower, the other is placed in the well to control the pump, which can prevent the pump equipment from being damaged due to insufficient water source to open the pump; three controllers can also be connected in series, one to the water tower, the other to the filter tank and one to River water (well) can be controlled at the same time, which can prevent the pump equipment from being damaged due to insufficient water source. It can also be connected in series with three controllers, and one can control two pump equipment at the same time.

.Technical Parameters
1. Working voltage: 250V ～ 380V.
2. Working current: 10 (8A) ～ 10 (4A).
3. Working temperature: 0 ～ 80 ℃.
4. Electrical life: 1 × 100,000 times.
5. Mechanical life: 5 × 100,000 times.
6. Lead length: 3m 4m 5m 10m and other special lengths and materials can be customized
4. Installation method
1. When using the black and blue wire floats at the upper liquid level, the contact is not connected, and when the float is at the lower liquid level, the contact is connected.
2. When using black and yellow wire floats at the upper liquid level, the contacts are in the connected state, and when the floats are at the lower liquid level, the contacts are in the closed state. "Cable float level switch" KEY cable float level switch TEK cable float level switch
3. The control height of the installation liquid level of the fixed weight is determined by the length of the cable of the (tek-1) Key cable float level switch in the liquid and the position of the weight in the cable.
The method of fixing (tek-1) Key cable float level switch weight is:
1. First remove the snap ring on the non-flare end of the plastic weight, and put it on the appropriate position of the cable
2. Then, insert the cable from the end of the bell of the plastic hammer. The snap ring on the cable defines the position of the hammer.
3. Finally, fix the cable in a suitable place outside the container. Connect the cable to the control box, and avoid using intermediate connectors as much as possible. If you need a connector, never immerse the connector in the liquid.
(Note: The snap ring at the non-flare end of the plastic weight can also be removed without removing the cable directly from the end of the flare, and then use the bare bare wire to wrap the cable at the appropriate position to clamp the plastic weight.)