Guide: China's 3D printing industry has been heavily attached to the aura and capital sought after, but this year there are still some big companies even exposed the news that the performance is bleak and falling into losses. 3D printing is not developing fast?
Luo Jun, executive director of China 3D Printing Technology Industry Alliance, pointed out that the output value of global 3D printing in 2014 was 30 billion yuan (in RMB, the same below). This year will exceed 50 billion yuan. He predicts that by 2020, the global output of 3D printing is expected to exceed 150 billion yuan.
In recent years, 3D printing has set off a boom around the world. However, after years of development, the 3D printing market has not experienced major breakthroughs. This year, some large companies in the industry have even reported that the performance is bleak and falling into losses.
Why is there a lot of halo and capital pursuits, but 3D printing is not developing fast? The industry generally believes that materials are one of the major bottlenecks restricting the promotion and development of 3D printing, and China is relatively backward in this respect.
Zhou Lian, an academician of the Chinese Academy of Engineering and a well-known metallurgical material expert, pointed out that at present, most of the polymer materials and metal materials used in China's 3D printing industry rely on imports, and the price remains high, which seriously hinders the market application of 3D printing in China. Moreover, people pay too much attention to 3D printing equipment, often ignoring the development of 3D printing materials.
On the same day, the China 3D Printing Materials Council was established. Zhou Lian was elected as the chairman of the 3D printed materials council. Zhou Lian pointed out that the establishment of the board of directors is to help the development of 3D printing materials industry, the future 3D printing materials will explode huge vitality, or occupy more than 30% of the 3D printing output value.
China is not only lagging behind in metal 3D printing and bio 3D printing equipment, but the gap in the material field is further widened. He also believes that the materials industry will have at least hundreds of billions of market space in the next 10 years.
Although the current application of materials in the field of 3D printing has reached more than 1,000 kinds, compared with the traditional manufacturing industry, it is not enough. Luo Jun said that after the establishment of the council, it will support a group of materials enterprises to cooperate with domestic and foreign scientific research institutions to realize the autonomy of Chinese 3D printing materials as soon as possible.
Although development has encountered many obstacles, Luo Jun believes that the current spring of 3D printing has come to be evident from the perspective of China's industrial policy, market, and industry support.
Luo Jun, executive director of China 3D Printing Technology Industry Alliance, pointed out that the output value of global 3D printing in 2014 was 30 billion yuan (in RMB, the same below). This year will exceed 50 billion yuan. He predicts that by 2020, the global output of 3D printing is expected to exceed 150 billion yuan.
In recent years, 3D printing has set off a boom around the world. However, after years of development, the 3D printing market has not experienced major breakthroughs. This year, some large companies in the industry have even reported that the performance is bleak and falling into losses.
Why is there a lot of halo and capital pursuits, but 3D printing is not developing fast? The industry generally believes that materials are one of the major bottlenecks restricting the promotion and development of 3D printing, and China is relatively backward in this respect.
Zhou Lian, an academician of the Chinese Academy of Engineering and a well-known metallurgical material expert, pointed out that at present, most of the polymer materials and metal materials used in China's 3D printing industry rely on imports, and the price remains high, which seriously hinders the market application of 3D printing in China. Moreover, people pay too much attention to 3D printing equipment, often ignoring the development of 3D printing materials.
On the same day, the China 3D Printing Materials Council was established. Zhou Lian was elected as the chairman of the 3D printed materials council. Zhou Lian pointed out that the establishment of the board of directors is to help the development of 3D printing materials industry, the future 3D printing materials will explode huge vitality, or occupy more than 30% of the 3D printing output value.
China is not only lagging behind in metal 3D printing and bio 3D printing equipment, but the gap in the material field is further widened. He also believes that the materials industry will have at least hundreds of billions of market space in the next 10 years.
Although the current application of materials in the field of 3D printing has reached more than 1,000 kinds, compared with the traditional manufacturing industry, it is not enough. Luo Jun said that after the establishment of the council, it will support a group of materials enterprises to cooperate with domestic and foreign scientific research institutions to realize the autonomy of Chinese 3D printing materials as soon as possible.
Although development has encountered many obstacles, Luo Jun believes that the current spring of 3D printing has come to be evident from the perspective of China's industrial policy, market, and industry support.

Silicone Kitchenware,Silicone Baking Anti-Slip Mat,Food Grade Silicone Mat,Baking Anti-Slip Mat
Dongguan Chakou Silicone Products Co, Ltd , https://www.waxmaidwholesale.com