Shanghai Lin frequency elaborates the characteristics of salt spray corrosion test chamber

Easy to operate, intuitive reading, beautiful appearance

The salt spray corrosion test chamber can evaluate the salt spray corrosion resistance of the material and its protective layer, and the process quality of similar protective layers. At the same time, it can evaluate the resistance of some products to salt spray corrosion. The product is suitable for parts and electronics. Salt spray corrosion test of components, protective layers of metal materials and industrial products.

Exquisite, unique, corrosion-resistant, clear and clear

The whole is imported PP reinforced hard plastic board, the surface is smooth and flat, and it is resistant to aging and corrosion. It is easy to clean and has no leakage. The glass fiber reinforced plastic material should be used for the time to produce surface fading and fibrillation. The observation window is left to facilitate the observation of test samples during the test. Subject status.

Humanized design, scientific experiment

Large salt water tank design eliminates the need to interrupt the test due to lack of salt water

All pipes in the test box are made of thickened fluorosilicone rubber tubes, which can remain unaged and cracked for 15 years.

Wide range of uses, powerful, and highly malleable

Test method

Neutral salt spray test (NSS test)

Salt spray test (SS test)

Acetate spray test (ASS test)

Copper accelerated vinegar instinct test

High temperature damp heat test

Salt spray box size:

Volume (unit: L) Studio size (D*W*H) mm Dimensions (D*W*H) mm

LRHS-108-RY 450×600×400 700×1200×1100

LRHS-270-RY 600×900×500 870×1400×1150

LRHS-412-RY 750×1100×500 1030×1680×1260

LRHS-663-RY 850×1300×600 1160×2000×1390

LRHS-816-RY 850×1600×600 1190×2260×1450

LRHS-1080-RY 900×2000×600 1220×2350×1450

[Lin frequency] salt spray box meets the standard:

GB/T2423.17-2008 Basic environmental test procedures for electric and electronic products - Test method for KA salt spray

GB/T 2423.18-2000 "Basic procedures for electric and electronic products test" Kb: salt spray, alternating (sodium chloride solution)

GB-T10125-1997 Artificial atmosphere salt spray corrosion test

GB/T10587-2006 salt spray test chamber technical conditions

GB10593.2-1990 Methods for measuring environmental parameters of electric and electronic products

GB-T1765-1979 Method for preparing paint film for moisture and heat resistance, salt spray resistance and weather resistance (manual acceleration)

GB T1771-2007 Determination of resistance to neutral salt spray of paints and varnishes

GB/T12967.3-2008 Copper accelerated acetate spray test (CASS test)

GB/T 5170.8-2008 Electrical and electronic products environmental testing equipment test method salt spray test equipment

And equivalent IEC, MIL, DIN, ASTM and other related standards or industry standards.

First, the main technical parameters of the salt spray box:

Temperature range: RT+5°C~55°C

Air saturator: RT + 10 ° C ~ 70 ° C

Humidity range: 85~98% RH

Temperature uniformity: ≤ 2 ° C

Temperature fluctuation: ±0.5 °C

Salt spray settlement: 1 ~ 2ml / 80cm2.h (16 hours average)

Compressed air pressure: 2.00 ± 0.01 (kg / cm2)

Spray method: continuous / cycle optional test time: 1 ~ 9999 H, M, S (adjustable)

Cycle time: 1~99 H, M, S (adjustable)

Sample holder: The sample holder can meet the tilt test of 15 ° C ~ 30 ° C

Second, salt spray box spray system

1. The spray adopts a tower sprayer (the height of the spire can be adjusted) to guide the salt spray, the fine particles are fine, and the natural sedimentation; the nozzle has no salt crystallization, and the settlement is adjustable;

2. The spray gas is subjected to two-stage voltage regulation and pressure regulation, and oil pollution filtration and gas humidification preheating are performed at the same time;

3. The atomized brine storage is built-in concealed and has a large storage capacity, and the brine is equipped with a preheating function;

4. The quartz brine filter element is equipped before the salt water is atomized to avoid the nozzle impurity blockage test.

5. All pipes in the test box are made of thickened fluorosilicone rubber tube, which can remain unaged and cracked for 15 years;

6. The salt water tank has high and low water level indications;

Third, equipment use conditions

1, the ambient temperature: 5 ° C ~ +28 ° C (average temperature within 24 hours ≤ 28 ° C)

2. Ambient humidity: ≤85%R?H

3, power requirements: AC220V ± 10% 50 ± 0.5Hz single-phase three-wire system

4, the operating environment needs to be below room temperature 30 degrees and well ventilated

5, the machine can be placed 50 cm before and after the left and right

Pneumatic Standing Desk

The pneumatic lifting table is a simplification of the automatic lifting table. It eliminates the need for a motor or compressor, and adjusts the air pressure bar manually to achieve the function of lifting

advantage:1. Low price and high cost performance 2. No need to connect to electricity, no oil, good safety.

Disadvantages:1. The stability is not high 2. It takes a little effort to raise and lower, and some buttons need to be lifted by hand to achieve the purpose of up and down.

Pneumatic standing desk

Adjustable Office Desk,Standing Computer Desk,Pneumatic Standing Desk,Office Desk Adjustable Table

Suzhou Uplift Intelligent Technology Co., Ltd , https://www.officeliftdesk.com

Posted on