Sanitary ware is an important component of our lives. Sanitary ware is used in everything from bathroom sanitary ware products to kitchen sink faucets. The use of sanitary ware for a long time will produce a variety of bacteria, so the cleaning of sanitary ware has become a basic household chore in our lives. According to different cleaning methods, there are different cleaning methods.
Tile and toilet cleaning
The surface of the tiles and tiles is a layer of vitreous glaze. When cleaning, it can be wiped with bathroom cleaning powder. Tile joints are likely to become black due to mildew after being used for a period of time. To eliminate this situation, use an old toothbrush to clean the bathroom.
Toilets, toilet cleaning can be used on the market to sell brushes or sponges, and bathroom cleaners plus cold water. When cleaning, pay special attention to the edge of the water circle and the water outlet below the water seal, because these two places are the most filthy places in toilets. When the toilet lid is dirty, it can be wiped with a cloth dampened with a neutral detergent.
Bathtub and faucet cleaning
Bathtubs and bathtubs have soapy scum on the sides and bottom for a period of time. It is therefore recommended that they be washed once daily after use to keep the bathtub clean at all times to prevent soap scum and bacterial growth. Bathtub cleaning can be slowly and repeatedly cleaned using bathroom cleaners until soap scum is completely cleaned. Place a hair collector at the drain hole of the bathtub to collect hair to avoid clogging of the water pipe.
Faucets and bronzes, showerheads that use water for a long period of time can cause poor water flow. Usually due to the accumulation of scale, the sprinklers can be removed and soaked in vinegar for two hours. After removal, the softened scale can be removed with a toothbrush. The hard water deposits of the faucets can be eliminated by cleansing with a sanitary net. Faucets and bronzes are metal products that have been electroplated on the surface. Corrosion and spotting can occur if they are used for a long period of time without being wiped. Usually, they are clean with a sanitary ware and they are very bright. Do not use acidic cleaners for cleaning. It will erode the copper.
Cleaning methods for sanitary ware in life are very rich. In general, we use cleaners to clean the sanitary ware. In fact, the surface of many sanitary wares cannot withstand vigorous cleaning, leaving scratches that are difficult to repair. Therefore, we should select the soft items such as towels to clean the sanitary ware as much as possible. At the same time, we must be careful about the choice of cleaning agents. We must choose non-corrosive reagents.
<\p><\div>
The designer fully draws on the international popular factors, and the streamlined design has created a precedent for the shape of the copy table. The most advanced LCD backlight technology is adopted, and high-brightness and energy-saving LED (light emitting diode) is used as the light source, so that the light uniformity and brightness of this product are qualitatively improved compared with the traditional copy table, and the display effect can be similar to that of the LCD comparable.
A2 LED Light Pad,LED Light Pad Tracing Board,Best LED Light Pad
Guangdong Jishengke Industrial Co.,Ltd , https://www.jskpad.com