PE-6 pad printing machine is suitable for the printing of various types of substrates such as plastic, metal, cloth, paper, glass, leather, etc. It shows good adaptability in the printing of flat, concave or curved surface, film to molded products. Therefore, it is widely used in various printing industries. Applicable plastic products range---Plastic toys, electrical product trademarks, electronic product trademarks, integrated circuit blocks, button trademarks, simulation toy eyes, craft nails, plastic stationery, plastic crafts, plastic sporting goods, CDs, telephone cases, Household appliances such as keyboards, computers and other office supplies, decorations, daily necessities, televisions, air conditioners, etc. This article will introduce you to the printing machine operating procedures.
Pad printing machines often use general-purpose inks, such an ink ink and additives can be printed on plastic rubber, metal glass, nylon canvas and other materials. The main advantages are low cost, strong adhesion and ideal color. However, for PE/PP materials, baking ceramics, etc. are not suitable. The corresponding thinner should be selected for the graphic characters, the size of the area and the suitability of the substrate. Usually we choose the standard type for the pad printing machine. of.
Before installing the pad printing machine, you need to understand the installation precautions, such as the environment selection. Not all places and environments are suitable for the pad printing machine. Only in the dry and very mild environment, can the long-term stable use This type of equipment.
Therefore, the closer the color of the printed matter to the substrate is, the better the pad printing effect is: a color can be reproduced on a colored or uncoated film medium, and reproducible on a darker plastic medium. difference. In addition, under the premise of a certain printing method, one or more layers of white ink are pre-printed as the base color, otherwise a better matching effect will not be obtained. For example, for clear glossy pigments, in order to avoid losing features, a layer of white ink is pre-printed before any color is printed. .
Article source address: http://
Galvanized Welded Wire Mesh
Features
1.)The grid structure concise, beautiful and practical;
2.)The easy to transport, install undulating terrain without restrictions;
3.)The Special is highly adaptive for the mountain, slope, bending zone;
4.)The price was relatively low for large-scale use.
Application
1)Railway and highway closed mesh ,
2)Field area fence,
3)Residential fence,
4)Various isolation mesh
Buying Guides
Please tell us some information :
1)material: mild steel wire/ hot dipped galvanized/ electric galvanized
2)galvanized surface treatment: galvanized after welded(corrosion resistance)/
galvanized before welded(easy to rust)
3)surface treatment: pvc or no
4)roll wire diameter: 0.3-3mm(no pvc)
panel wire diameter: 3-4.5mm(no pvc)
5)pvc color: green/ grey etc.
6)hole type: square or rectangle
7)roll size: wideth 0.5-3m;length up to 30m
panel size: wideth no more than 2m,general size1.8*3m
8)quantity: different quantity hold different price
9)special requirements please let us know
10)Thank you very much.
Galvanized Welded Wire Mesh,Wire Mesh Fence,Galvanized Welded Mesh,Assembled Welded Wire Mesh
Anping Chuangqian Wire Mesh Co., Ltd , https://www.cqwiremesh.com