Dongguan Haida Instrument Co., Ltd. is a professional packaging testing equipment manufacturer. The company's carton compression testing machine cooperates with Libai, Liwen Paper and other groups. The performance parameters and technical specifications of the carton compression tester are in accordance with ISO2872 "Packaging - Complete, Fully Loaded Transport Packages - Pressure Test", ISO2874 "Packaging - Complete, Fully Fitted Transport Packages" "Compression test conducted by pressure tester" and GB4857.4 "Basic test pressure test method for transport packages" and other standards, applicable to the compressive strength test and stacking strength test of type corrugated box and other packaging products.
In daily use, the repair and maintenance of the carton compressive testing machine will surely be involved. The following Dongguan Haida will introduce you to the repair and maintenance of the carton compressive testing machine.
1. The operator should thoroughly read the instruction manual and strictly observe the operation rules ;
2. Maintain the working environment of the tester clean and tidy ; Â Â Â Â Â Â
3. When the test machine fails, it should be checked and ruled out by a professional. Do not run it sick.
4. Insist on periodic verification to maintain the excellent technical status of the testing machine. The verification period is generally one year ;
5. Irregularly lubricate the moving parts of the testing machine intermittently ;
6. When the paper roll is used up or the writing is unclear, replace the paper roll or print ribbon.
7. Carton Compression Tester Two drive screws must pay attention to maintain proper lubrication. Lubricating oil adopts specific mechanical oil. When refueling, the dust shields at the openings of the two columns must be disassembled , brushed with a brush, and oiled. Do not go down to the degree.
8. The carton compression tester drive chain should be timely refueling, lubricants use a specific type of mechanical oil, when refueling, the machine can be tilted backwards to make the base up, with the brush and brush the oil on the bottom of the base chain, The fluid should not be too much, so that it does not flow down.
Recommended quality products: micro-computer carton compression machine, computer carton compression testing machine, servo carton compressive strength testing machine
Three to four hours after the completion of the tattoo, clean the tattoo with warm water, use a bath, then dry with a sanitary towel, keep dry, apply the care cream, after cleaning every day, apply once.
Tattoo attention points - maintenance
1. After completing the tattoo, clean the whole part with color toner, apply color anti-inflammatory gel, then wrap the bandage and keep it for at least two hours;
2. Undo the bandage, clean the tattoo with color toner and blot the water dry;
3, apply color anti-inflammatory gel, and wipe off the excess, color anti-inflammatory gel four times a day;
4, keep the tattoo part moist and breathable, no need to bandage;
5. Swimming or long time immersion in water is prohibited within one week;
6. Avoid excessive exposure to sunlight for one month;
7, can not scratch or tear off the scab part;
8, can be used to pat or wipe alcohol method to reduce itching;
9. Wear loose clothing.
Tattoo Care,Tattoo Aftercare,Professional Tattoo Aftercare,Tattoo Ointment
DONGGUAN VOLES COMMODITY CO., LTD , https://www.volesvip.com