Shanghai Haozhuang Instrument Co., Ltd. has developed the LNB brand mold incubator, which is energy-saving and environmentally friendly, leading the country. Professional manufacturing is more secure and affordable. The company relies on modern science and technology to continuously improve product quality and launch new products to keep it synchronized with international standards. The products are exported to all parts of the country and have won the trust of users with excellent quality and perfect service. . The employees of the company have always pursued the enterprise spirit of "unity, truth-seeking and innovation". With the tenet of "user first, quality first, reputation first", we sincerely welcome new and old customers to visit us.
1. Turn on the power and turn on the power switch to put the switch in the "ON" position, and the device enters the power-on state. At this time, the temperature and time setting operation can be started. 2. Status indication: After setting, the device will operate according to the set parameters. When the measured temperature is lower than the set temperature, the device enters the heating state, and the heating indicator lights. Conversely, when the measured temperature is higher than the set temperature, the cooling indicator lights and the device enters the cooling state. When the measured temperature is 4 ℃ higher than the set temperature, the alarm indicator lights and the buzzer also sounds. 3. Temperature / time key can switch between temperature and time 1) Temperature setting: Press the temperature / time key, the temperature setting indicator of the instrument lights up. Press the setting key to enter the SV state, one of the three numbers in the setting display flashes, then press the shift key (<) to move the flashing number to the desired setting position, and then press the ∨ or ∧ key to change the temperature setting Set the value to the required temperature (minimum value 0.1 ℃), and finally press the set key to store the set value in the microcontroller, at this time the left display window displays the measured temperature, and the right display window displays the set temperature. 2) Time setting: Press the temperature / time key once, the indicator of the time setting of the instrument will be on. Press the setting key to enter the TV state, one of the three numbers in the setting display window flashes, then press the shift key (<) to move the flashing number to the desired setting position, and then press the ∨ or ∧ key to change the time setting Set the value until the required time (minimum value 1h), and finally press the set key to store the set value in the microcontroller, at this time the left display window displays the measurement time, the right display window displays the set time. Timing function: When the instrument is powered on, the timing function starts. After the timer expires, the output is turned off. The heater and refrigeration compressor stop working, and the temperature in the incubator will gradually reach the ambient temperature. 4. Parameter modification: If you want to modify the temperature and time parameters during operation, then modify according to procedures 1 and 2. 5. Quick setting: When setting the parameter, one of the three digits flashes, if you press ∧ key, the last digit of the setting value will increase by 1; if you press this key and don't let go, after about 3 seconds, set The set value increases by 1 continuously; if you press ∨, the set value decreases by 1; if you hold down the key, the set value decreases by 1 after about 3 seconds.
Pp Spoon,Poly Spoons,Polypropylene Plastic Cutlery,Pp Cutlery Spoon
Anhui Jianfeng Environmental Protection Technology Co., Ltd , https://www.ahbiocutleries.com