Chinese woodcarving art has a long history. Wood carving is the most important decoration method of traditional furniture. There are many kinds of carving techniques. Among the Ming and Qing mahogany furniture that everyone knows, the most basic carving techniques include relief, enamel carving, round carving, inlay carving and carving. Through the double-sided carving and so on.
Among them, inlaid carvings have their own characteristics and are widely used. They are made of different materials, such as jade, ivory, coral, etc., which are first made into flowers, figures, terraces, trees and other patterns, and then carved on the wooden surface according to the pattern. Slot, and then embed these patterns in between. The inlaid carvings are clearly defined and have a luxurious decorative effect. Such as snail mosaic process, century-old boxwood process, animal bone inlay process (bone wood inlay). The material mainly uses rosewood, red sandalwood, boxwood, ivory and bovine bone.
Among the dazzling inlaid carvings, boxwood inlays are particularly worth mentioning. The range of their application is relatively wide. It is more common in some furniture carvings in the south. The biggest advantage is that the materials are easy to find, suitable for all kinds of pictures, and Perform a larger inlay.
This website should be inlaid with the requirements of the craftsmanship craftsmanship. Through the in-depth plant area and production line, the collected technology will be briefly introduced. Boxwood inlays are mainly divided into the following four steps.
The first step is the drawing design. According to the drawings, two identical patterns are cut out by the skilled workers, one is boxwood (inlaid material) and the other is the wooden surface of the finished furniture embedded (to be embedded) part. The difference between the two is that the inlaid part has to be slightly smaller, and the embedding groove is slightly larger. The principle is similar to that of the furniture.
In the second step, the pattern is carved by hand and machine, and the inlaid part (boxwood) removes the sapwood, leaving only the complete pattern (convex surface); the part to be embedded (furniture) is just the opposite, the whole pattern needs to be dug out and the pattern is presented. The groove, the thickness of the convex and concave is determined according to the design requirements of the furniture. There is no uniform standard, but the convex part (boxwood) is slightly thicker than the groove part, so that the three-dimensional effect of the pattern can be highlighted.
In the third step, it is necessary to use professional tools to carefully insert the convex pattern (boxwood) pieces into the groove (furniture part). There must be no errors. It is necessary to meet the aesthetic requirements, and avoid or use less glue. Therefore, how the first two steps work is the key, if not, it is likely to abolish one of the materials to do it again.
The fourth step is the last step, because there will be errors in the calculation of precision, and it is inevitable to leave a gap. Therefore, the final dressing and polishing is very important, and it is also delicate. It requires the mechanic to repair it with a carving knife. Scratches and gaps vary in width. After finishing and polishing, it should look like a natural synthetic whole. This work is completed.
The whole process of production seems to be simple, and in fact there will be many unexpected problems. The first problem encountered is the material problem, such as the requirement for the boxwood embedded in it is very high, because the boxwood is sawn, there will be black hearts and dark spots inside, so the choice of materials is very important.
Secondly, the meticulousness and patience of the skilled workers are required. Although the decorative patterns are embedded in them, the flat panels are embedded, but most of the embedded parts of the furniture have curved designs of different sizes, and various patterns are embedded on them. In some places, even less than a millimeter is fine. If it is not very careful, it will appear uneven, which will affect the beauty of the overall furniture.
The reason why boxwood inlays are greatly loved by consumers is because they have a variety of designs and choose to be eclectic. For example, deep carvings and round carvings can be used. Therefore, the high quality boxwood carvings and crafts on the market have High appreciation, use and collection value.
Among them, inlaid carvings have their own characteristics and are widely used. They are made of different materials, such as jade, ivory, coral, etc., which are first made into flowers, figures, terraces, trees and other patterns, and then carved on the wooden surface according to the pattern. Slot, and then embed these patterns in between. The inlaid carvings are clearly defined and have a luxurious decorative effect. Such as snail mosaic process, century-old boxwood process, animal bone inlay process (bone wood inlay). The material mainly uses rosewood, red sandalwood, boxwood, ivory and bovine bone.
Among the dazzling inlaid carvings, boxwood inlays are particularly worth mentioning. The range of their application is relatively wide. It is more common in some furniture carvings in the south. The biggest advantage is that the materials are easy to find, suitable for all kinds of pictures, and Perform a larger inlay.
This website should be inlaid with the requirements of the craftsmanship craftsmanship. Through the in-depth plant area and production line, the collected technology will be briefly introduced. Boxwood inlays are mainly divided into the following four steps.
The first step is the drawing design. According to the drawings, two identical patterns are cut out by the skilled workers, one is boxwood (inlaid material) and the other is the wooden surface of the finished furniture embedded (to be embedded) part. The difference between the two is that the inlaid part has to be slightly smaller, and the embedding groove is slightly larger. The principle is similar to that of the furniture.
In the second step, the pattern is carved by hand and machine, and the inlaid part (boxwood) removes the sapwood, leaving only the complete pattern (convex surface); the part to be embedded (furniture) is just the opposite, the whole pattern needs to be dug out and the pattern is presented. The groove, the thickness of the convex and concave is determined according to the design requirements of the furniture. There is no uniform standard, but the convex part (boxwood) is slightly thicker than the groove part, so that the three-dimensional effect of the pattern can be highlighted.
In the third step, it is necessary to use professional tools to carefully insert the convex pattern (boxwood) pieces into the groove (furniture part). There must be no errors. It is necessary to meet the aesthetic requirements, and avoid or use less glue. Therefore, how the first two steps work is the key, if not, it is likely to abolish one of the materials to do it again.
The fourth step is the last step, because there will be errors in the calculation of precision, and it is inevitable to leave a gap. Therefore, the final dressing and polishing is very important, and it is also delicate. It requires the mechanic to repair it with a carving knife. Scratches and gaps vary in width. After finishing and polishing, it should look like a natural synthetic whole. This work is completed.
The whole process of production seems to be simple, and in fact there will be many unexpected problems. The first problem encountered is the material problem, such as the requirement for the boxwood embedded in it is very high, because the boxwood is sawn, there will be black hearts and dark spots inside, so the choice of materials is very important.
Secondly, the meticulousness and patience of the skilled workers are required. Although the decorative patterns are embedded in them, the flat panels are embedded, but most of the embedded parts of the furniture have curved designs of different sizes, and various patterns are embedded on them. In some places, even less than a millimeter is fine. If it is not very careful, it will appear uneven, which will affect the beauty of the overall furniture.
The reason why boxwood inlays are greatly loved by consumers is because they have a variety of designs and choose to be eclectic. For example, deep carvings and round carvings can be used. Therefore, the high quality boxwood carvings and crafts on the market have High appreciation, use and collection value.
Motorized Projector Screen,Electric Projector Screen,Electric Motorized Projector Screen,Projector Screen Motorized Ceiling
Dongguan Aoxing Audio Visual Equipment CO.,Ltd , https://www.aoxing.net