CorelDraw print output notes (a)

First, the font problem 1 some font library description method is different, the overlapping overlap of the stroke will be out of stack, be careful!

2 Paragraph texts containing special characters in Chinese and English are prone to problems such as "■, @, ★, ○", etc.

3 Use the new standard GBK font to solve the problem of remote word loss.

4 strokes too thin font, it is best not to use more than 3 colors of aliasing, such as (C10 M30 Y80) and so on, the same reason, it does not apply to dark-colored anti-white characters. Under conditions that cannot be avoided, it is necessary to mark the reversed white character, apply a similar color to the background, or print a single color (usually black K).

Second, the problem of gradual change

1 The common problem is this: If the red → black gradient, set the wrong: (M100 → K100) will be hard to see in the middle!

The correct setting should be like this: (M100 → M100 K100) After careful analysis, you will understand, and other situations will be analogized.

2 transparent gradient, is suitable for network graphics methods, grayscale can also be, but the final draft output can not be, because of its spatial mixing mode is RGB, screen mixing color with printing CMYK too much difference, pay attention.

3 The black part of the gradient should not be too low, such as 5% black, because the output has a black overprint option, less than 10% of the black is usually used instead of overprinting, resulting in problems, the same, the use of pure light black also Be careful.