The structure of the plate is composed of aluminum base, photosensitive resin layer and silicone rubber layer. During exposure, the silicone rubber layer that is exposed to light reacts, the silicone rubber layer is removed by the developer, and the portion that is not exposed to light forms a blank portion of the printing plate, forming a negative plate.
The graphic part of the negative type non-horizontal version is slightly concave, and the ink is not easy to diffuse after the ink is applied. The silicone rubber layer in the blank part has a repelling effect on the ink. Therefore, we can use no wetting liquid during printing, thus avoiding the cause of the wetting liquid Many failures. The ink used in waterless offset printing is lower in viscosity and adhesion than water-based offset printing inks. The main components are high-viscosity modified phenolic resins and high-boiling non-aromatic solvents, which are easily decomposed when heated. Keep fit.
Waterless offset printing, the dot increase value is small, the dot increase value can be controlled within 3%, 200 to 500 lines / in fine screen line can be used, and high resolution image prints can be printed. If combined with FM screening technology, unparalleled high-end and exquisite printed matter can be printed. Waterless offset printing removes water that is difficult to control, no ink emulsification, and the ink color of the printed product is uniform and highly saturated. When printing with waterless offset printing, generally 5 sheets of paper can be used for official printing, with low paper consumption rate and high production efficiency. Waterless offset printing, as an advanced printing technology, may replace traditional waterborne offset printing.
Since waterless printing does not use fountain solution, there is no emulsification of the ink. However, due to the lack of moisturizing water to repair and clean the printing surface during printing, the printing surface is prone to smearing. For this reason, the printing pressure of waterless printing should be lower than that of PS printing.
Bar table and stool is a versatile casual option that can add character, color and texture to your kitchen or bar design - or simply offer a comfortable place to sit.
In recent years, barstools have become a popular alternative to traditional dining room chairs. Barstools appear recognizable and desirable for their height advantage over typical dining chairs. Typically, barstools give off a more casual dining vibe, especially when coupled with a counter-height table. Many homes also have high breakfast counters that also need barstools. Since every home is different, you need a barstool that matches your style and color.
· Rattan/textilene seat in a woven design for ultimate durability and strength
· Aluminum frame for a solid and sturdy foundation
· Powder coated for sophisticated looks to last
· Foot stoppers to reduce scuff marks to your flooring
· Cushions also available with 100% waterproof fabric.
Bar table and stool has many material options, rattan, textilene, aluminum powder coated etc.
If you have any questions, please contact with us directly. Bar table and stools are produced by Golden Eagle Outdoor Furniture With High Quality and Good Appearance. Welcome you can visit our Factory.For any inquiry,Please send mail directly to us.
Bar Table And Stool,Rattan Bar Table And Stool,Outdoor Bar Table And Stool,Garden Bar Table And Stool
Golden Eagle Outdoor Furniture Co., LTD. , https://www.geoutdoor.com